How to Use your Automatic Sensitivity Support Kit: A Simple Guide to Controlled Vacuum Therapy

An automatic vaginal vacuum pump uses controlled, motorised suction to gently stimulate blood flow and tissue response. It is commonly used for vaginal health, sensitivity support, circulation, and therapeutic care.

This guide explains how to safely use a rechargeable automatic vaginal vacuum pump.

Step 1: Clean the Pump Before Use

1. Ensure the device is powered off.

2. Clean the pump opening and any removable parts with antibacterial toy cleaner.

3. Avoid charging ports if the device is not fully waterproof.

4. Rinse gently with warm water.

5. Pat dry with a clean towel.

Always clean before and after use.

Step 2: Charge the Device

• Fully charge the pump before first use
• Ensure the device is not connected to a charger during use

Never use the pump while charging.

Step 3: Apply Lubricant

1. Apply water-based lubricant to the rim of the pump.

2. Apply a small amount to the vaginal opening.

Lubrication helps ensure comfort and an effective seal.

Step 4: Position the Pump

1. Sit or lie comfortably.

2. Place the pump opening gently over the vaginal area.

3. Ensure a proper seal before activating suction.

Step 5: Activate Automatic Suction

1. Turn the device on using the lowest suction setting.

2. Allow the pump to cycle or gently apply suction.

3. Increase intensity slowly if comfortable.

Suction should always feel gentle and controlled.

Step 6: Use and Timing

• Start with 5–10 minutes per session
• Gradually increase to 10–15 minutes if comfortable
• Use no more than once per day unless advised otherwise

Always turn off and release suction before removal.

Step 7: What You Should and Should Not Feel

You should feel:
• Gentle pulling sensation
• Increased warmth or blood flow

You should NOT:
• Feel pain or strong pressure
• Experience numbness or discomfort
• Ignore discomfort

Stop use immediately if pain occurs.

Step 8: Remove and Clean After Use

1. Turn the device off.

2. Ensure suction is fully released.

3. Gently remove the pump.

4. Clean, rinse, dry, and store safely.

Key Safety Tips

• Always start on the lowest setting
• Never use while charging
• Use lubricant every time
• Do not exceed recommended use time
• Stop if pain or discomfort occurs